The safe use of this product requires an understanding
information on the tool and in this product manual, as well as knowledge of the
project you are attempting° Before use of this product, familiarize yourself with all
operating features and safety rules.
0 ° TO 48 ° Bevel
lever allows you to set the trim saw for bevel cuts from 0 ° to
The laser guide projects
red line onto the workpiece,
aiding in alignment
on the front of the saw, allows
The saw is equipped
with an edge guide for accurate
allows you to secure the blade when turning
of cut a maximum
of 0 to
at 90 ° and 0 to 1 1/164n.
at 45 °.
If any parts are broken
DO NOT attempt
to plug in
the power cord or operate
the saw until the broken or missing
parts are replaced.
Failure to do so could
result in possible
Do not attempt
this saw or create accessories
for use with this saw° Any such alteration
and could result in a hazardous
leading to possible
the tool from the power source when
This product has been shipped completely assembled.
1. Carefully remove the too! and the accessories from the box. Make sure that all
items listed in the packing list are included.
Inspect the tool carefully to make sure that no breakage or damage occurred