Operation - Craftsman 152.211240 Owner's Manual

(
The Bench Grinder is designed for hand held grinding,
sharpening, and cleaning operations.,
ALWAYS WEAR EYE PROTECTION! Hot sparks are
produced during grinding operations,.
1,. The Power Switch must be in the "OFF" position.
2. Stand to the side of the Bench Grinder and plug in
the power cord to a suitable power source..
3_ Remain to the side of the Bench Grinder and turn it
"ON" by moving the power switch to the up position_
4. Allow the grinding wheels to come up to a steady
speed for at least one minute°
5.. The Flexible Work Light may be turned "ON" if
desired.
6o Adjust the eyeshields.. Place the workpiece on the
appropriate tool rest for the desired operation_
10
7_
Move the workpiece towards the grinding wheel
until it lightly touches1 Move the workpiece back
and forth across the front surface of the grinding
wheel removing the amount of material desired_
8_
10
To avoid serious injury, never grind on the sides
of the grinding wheels.
After completing the gdnding operations, turn "OFF"
the Bench Grinder by pushing down on the Power
Switch,. CAUTION: It will take a few minutes for the
grinding wheels to come to a complete stop_
Tum "OFF" the Flexible Work LighL CAUTION: The
Flexible Work Light housing will remain hot for a
few minutes after turning it "OFF".
Avoid contact with housing until it is cool Unplug
the Bench Grinder from the power source