Table of Contents
Advertisement
To turn the motor "OFF" Push the toggle switch to the right side marked "O", or
"Off".
Always hold the routerand the cutter bit away from the workpiecewhen turning the toggle
switch
"On". Only contact the workpiece
with the router and cutter bit after the router
has reached full speed. Only remove the router and cutter bit from the workpiece
after turning the router motor "OFF", and the cutter bit comes to a complete
stop.
SOFT START FEATURE
Electronic
feedback
control
minimizes
torque
twist, customary
in larger router motors, by
limiting the speed at which the motor starts.
This increases the motor's
life.
LED WORKLIGHTS (Fig. 10)
Your router motor has 3 built-in worklights
located around the collet/nut
to provide high
visibility
of workpiece
when cutting.
These
lights are always "On" when the toggle switch
is in the "On "position.
"LIVE TOOL iNDiCATOR" LIGHT (Fig. 11)
Your router also has a "live tool indicator"
green light, located on the motor housing top
cap where the power cord enters the motor
housing.
This green light is always on when
router motor is plugged
into power source.
Fig. 10
HEAVY=DUTY
EDGE GUIDE (SOLD
SEPARATELY)
The router comes
with a heavy duty edge
guide. This edge guide can be used as an aid
in routing
applications
such as decorative
edging,
straight edge planning and
trimming,
grooving,
dadoing
and slotting.
To attach the edge guide to the fixed or
plunge base, simply insert the edge guide
rods into the edge-guide
mounting
slots
either from left or the right.
Tighten the lever on left by turning
it
counterclockwise
to secure the edge guide
rod (Fig. 12). Tighten the lever on right by
turning
clockwise
to secure the rod.
Fig.
27669
ManuaLRevised_$$-02$5
Page 25
Hide quick links:
Advertisement
Table of Contents
