Transporting The Printer - Epson STYLUS Photo R340 Printer Basics Manual

4. Use a soft, dry cloth to clean the LCD screen and preview monitor. Do not use liquid or
chemical cleaners on these parts.
5. If ink has spilled inside the printer, wipe it off only in the area shown below using a soft,
damp cloth.
Clean here
Caution: Be careful not to wipe away lubricating grease inside the printer.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the
printer components and case.
Don't get water on the printer components and don't spray lubricants or oils inside the
printer.
Don't use any cleaning sheets included with special paper; they may jam inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it for transportation in its
original box or one of a similar size.
Caution: To avoid damage, always leave the ink cartridges installed when transporting the
printer.
1. Turn on the printer, wait until the print head locks in the far right position, then turn off
the printer.
2. Unplug the power cord from the electrical outlet.
3. Remove any memory cards from the printer and close the memory card cover.
4. Remove any paper from the printer, push down the paper support extension, and close
the paper support.
Transporting the Printer
51