4. LED Indicators
4.1 LED Panels
The switch provides comprehensive LED indicators for diagnosing and
monitoring the operation of the unit as illustrated below:
4.2 Interpretation
Power LED : indicates the status of the power supplied to the switch.
Link/Act. LED : indicates the port cable link and traffic activity.
10/100M LED : indicates the connection speed used
Duplex/Col. LED : indicate the duplex mode used and collision status
FX LED : indicate the fiber module is installed and active.
The LED indicators labeled a port number on top are corresponding to a
specific 10/100BASE-TX port. The states and indications are:
LED
Power
Power
Link/Act.
Link/Act.
Link/Act.
10/100M
10/100M
Duplex/Col.
Duplex/Col.
Duplex/Col.
FX
STATE
INDICATION
Off
Power Off
On
Power On
On
Link active
Off
No active link
Blink
Tx or Rx activities.
On
100Mbps speed
Off
10Mbps speed
On
Full duplex mode
Off
Half duplex mode
Blink
Collision occurrences
On
One fiber module is on.
-22-