Download Table of Contents Print this page

Care And Cleaning - Black & Decker Digital Advantage D1200 Use And Care Book Manual

Hide thumbs Also See for Digital Advantage D1200:


Available languages
Table of Contents
• The unit beeps. Once the beeping stops, UTO OFF flashes on
the digital display window to let you know the iron has stopped
heating (E).
fter a few minutes, the digital display light goes off.
IMPORT NT: UTO OFF will continue to blink until the iron is
turned off, unplugged or if you move it.
• Remember: The iron will remain hot to the touch!
• If you pick up the iron, it activates an internal motion sensitive detector and the iron
will start heating again. You might have to move the iron or shake it gently. The digital
display light comes on and the set temperature is displayed again.
Note: Wait for iron to reheat completely before resuming operation.
Smart Steam ™ Technology
The Smart Steam ™ system generates steam only at higher
temperature settings (between 4 and 7) (F). Once you select
the temperature, the Smart Steam ™ technology detects the set
temperature and adjusts the steam power accordingly. The higher
the setting, the more powerful the steam.
Surge of Steam
Use to remove stubborn creases.
With the water tank filled to the M X mark, set fabric-select dial to appropriate setting
(between 4 and 7) for your fabric. Read garment's label to help you determine fabric
Note: Steam is automatically turned off between settings 1 and 3.
2. Once you select the appropriate setting, wait for iron to beep
and display RE DY.
3. Press the surge-of-steam button
(G). For best performance, leave an interval of 5 seconds
between bursts.
Important: lways stand the iron on its heel rest when powered on
but not in use.
Use for removing wrinkles from hanging clothes and drapes.
1. Be sure the water tank is filled to the M X mark.
2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be
steamed once they are hung.)
3. Set the fabric-select dial to appropriate setting (between 4 and 7) for your fabric.
4. Wait for iron to beep and display RE DY.
5. Hold the iron close to, but not touching, the fabric.
6. Pull the fabric tight in your free hand and pump the
surge-of-steam button
fabric (H).
Important: lways stand the iron on its heel rest when powered on
but not in use.
to generate a burst of steam
as you move the iron over the
Using Spray
Use to dampen tough wrinkles at any setting (J).
1. Be sure the iron is filled with water.
2. On first use, pump the spray button
The anti-drip system prevents water spotting at low temperatures.
Dry Ironing
1. Turn the fabric-select dial to setting 1, 2, or 3 to iron without
(K). The Smart Steam™ system will automatically turn off
and there will not be any steam generated.
2. To dry iron at higher settings, empty the water from the reservoir
to prevent steaming.
Emptying Water Tank (Optional)
Note: It is not necessary to empty the water after each use.
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the tip
pointing down. Water will empty out of the water-fill hole (L).
Your iron has a multilingual digital display that lets you select from
the English, French or Spanish language.
1. When you plug in the iron, the display defaults to English.
To change the language, press and hold the change language
button for 2-4 seconds (M). The digital display changes to
2. Press and hold the button for another 2-4 seconds to change from French to Spanish.
3. To go back to English, press the button again for 2-4 seconds.
Note: The languages will change in the order listed above.
4. Once you unplug the iron, the language will default to English again.

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service
Cleaning Outside Surfaces
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer
surfaces with a soft cloth dampened with water. dd mild household detergent. Never
use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch
or discolor the iron.
fter cleaning, steam iron over an old cloth to remove any residue from the
steam vents.
uto Cleaning
To keep the steam vents free of any buildup, about once a month follow these instructions.
1. Fill the water tank well below the M X line. Plug in the iron.
2. Turn the fabric-select dial to 7 and stand the iron on its heel rest.
several times.

Hide quick links:


Table of Contents

Table of Contents