Clearing The Memory - X10 UR24A Owner's Manual

CLEARING THE MEMORY

It is recommended that you clear the
memory in the Learning SuperRemote
before you start programming it:
1. Press and hold
SETUP until the
LED indicator
lights steadily.
Release the
SETUP button.
2. Press and release
the LEARN key
twice.
3. Press and release
the SETUP key.
12
You can also clear the memory for just a
particular mode (TV, VCR, etc.).
1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2. Press and release
the desired mode
button (TV, VCR,
etc.). The LED blinks
once.
3. Press the LEARN
key. The LED blinks
once.
4. Press SETUP. The
LED turns off after a
few seconds.
13