Download Print this page

Quick Tour - X10 MT12A Owner's Manual

Mini timer
Hide thumbs

Advertisement

Quick Tour

Let's quickly review the functions of each part of the keyboard (you can go to page 7 for
a step by step tutorial if you prefer). Referring to the diagram below and the cutaway
sections that follow you will see that the keyboard on the Mini Timer consists of 7 basic
areas.
3 Time Adjust Rocker
4. Set
Alarm
5. All Units Off Button
6. Mode Button
5. All Units Off Button. Instantly turns Off ALL Modules including Appliance Modules.
6. Mode Button cycles through Daily, Once, and Security Modes.
7. All Lights On Button. Instantly turns on ALL Lamp Modules and Wall Switch
Modules.
2. ON/OFF
Buttons
1.
Mode Switch. This is used to select whether you want to
set or review a timed event, change the Housecode, or
set the clock. See page 13 to change the Housecode.
2.
ON/OFF Buttons. There are 4 sets of ON/OFF buttons.
They let you turn Modules 1 through 4 (or 5 through 8)
on and off instantly by pressing either the ON or OFF
button.
In the "Prog Set/Review" mode these button are used to
set on and off times for the selected number (1 to 4 or 5
to 8).
3.
Time Adjust Rocker. This is used to set the time of the
clock and the time you want to set for each programmed
event.
4.
Alarm. The number 1 button also sets the time for the
internal alarm buzzer.
5
1. Mode
Switch
7. All Lights On Button

Advertisement

loading

  Related Manuals for X10 MT12A