Preparation For Use; Installing Batteries - Zenith Sentry 2 Operating Manual & Warranty

REMOTE CONTROL MODEL MBR3420
PREPARATION FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high qual-
ity, alkaline, size AAA batteries.
After installing new batteries, the remote control will set itself
to Zenith brand codes, as follows: TV=101, VCR=201 and
CABLE=301.
If you are going to operate equipment that uses different
codes, the remote must be reprogrammed for those codes.
NOTE: Zenith is not responsible _br damage caused by bat-
tery leakage.
Step 1.
Step 2.
Step 3.
2733-0 5_5