I_Q Editing; Front Panel - JVC HR-J620U Instructions Manual

O Editing
Player
AUDIO OUT
Recorder
AUDIO IN
Your VCR
VIDEO OUT
VIDEO IN
Another VCR
To edit to or from another VCR
I Your VCR be used as either the deck the
can
recording
or SOUrCe
player when editing tapes.
PREPARATION
[] Connect the player's VIDEO OUT and AUDIO OUT
connectors to the recorder's VIDEO IN and AUDIO IN
connectors.
• When using your VCR as a recorder and connecting it to a
monaural deck, connect that deck's AUDIO OUT connector
to your VCR's AUDIO IN L connector.
OPERATION
[] Press MENU, SET, and
SELECT as many times as f AUX
INPUT
f 1
necessary to access the AUX | , FRONT
INPUT screen. (Ezr p.9) /
REAR
"J
[] Press SET to choose "FRONT"
or"REAR", t PRESS (SET + /-)FOR C H01CE|
• Select FRONT to connect to
the front panel connectors.
• Select REAR to connect to the rear panel connectors.
[] Press MENU as many times as necessary to exit.
[] Set the recorder's input mode to AUX.
• With this VCR model, press the digit key "0". "AU" .will
appear instead of a channel number.
t [] Put the player in the Play mode.
I [] Put the recorder in the Record mode.
VIDEO
IN
Recorder
AUDIO
IN
Your VCR
AUDIO OUT VIDEO
To control two JVC VCRs
The remote control is capable of controlling two JVC VCRs
independently using the A/B CODE switch (_:rp.7): You can set
this VCR so that it responds to the remote control only when the
switch is in the "B" position and set another JVC VCR so that it
responds only when the switch is in the "A" position. This way
you can control two,.lVC VCRs independently with a single
remote control.
The A/B CODE switch is preset to the "A" position because your
VCR is initially set to respond to A code signals. You can easily
modify your VCR to respond to B code signals.
I1-] Unplug the VCR's power cord from the AC outlet.
[] Set the A/B CODE switch on the remote control unit to "B".
[] Plug the VCR's power cord back into the AC outlet. Do not
use other remote controls at this stage.
[] Tum the VCR power on using the remote control's POWER
button. The VCR will now respond only to B code signals.
Player
Another VCR
26