I_ Playback - JVC HR-J620U Instructions Manual

Playback
POR INSTRUCCIONES EN
ESPANOL VEA p.32 - 33.
The easiest, most basic operation possible with your VCR is tape playback. Previously-recorded signals on a video tape are read by
your VCR and displayed on your TV just like a TV program.
REW
PLAY
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
6
Insert a cassette with its window side up, and label side
facing you. Press gradually on the middle of the cassette
until the VCR pulls the cassette in.
• The VCR power will come on automatically.
• The counter will be reset to "OH00M 00S" automatically.
• If the safety tab on the cassette is absent, playback will
start automatically.
Press I_ (PLAY).
Press • (STOP).
Press -<1<1to rewind the tape.
Press _ to fast-forward the tape.
• Press • to stop the tape.
_
Press the VCR's n/_ (STOP/EJECT) button.
To view a still picture
During Playback...
[] PressPAUSE toview a still picture.
• If there is vertical picture jitter, press CH - or + (on the
VCR or remote control) to make the picture more stable.
[] To advance the picture frame by frame, press PAUSE again.
• For frame-by-frame playback in the forward or reverse
direction, press SHUTTLE PLUS I<< or I)-1)4in the
corresponding direction while in the still picture mode.
[] Press PLAY to resume normal playback.
To view a slow/fast-motion picture
During Playback...
[] Press the SHUTTLE PLUS 14-(I or I_IH button. Tape speed
will change in the corresponding direction.
• To increase the speed, press the button for the same direction.
• To decrease speed, press the button for the opposite direction.
• For forward slow motion playback, press PAUSE for more
than 2 seconds while in the still picture mode.
[] Press PLAY to resume normal playback,
Or...
During Playback...
[] Press FF for forward fast-motion, or REW for reverse fast-
motion.
[] Press PLAY to resume normal playback.
• For short searches, keep FF or REW pressed for more than
2 seconds. When released, normal playback will continue.
15