Operating Other Devices Using The Remote Control; Operating A Tv Using The Remote Control; Remote Control - JVC DD-8 Instructions Manual

Operating other devices using the remote control

You can operate your TV, video cassette recorder
(VCR) and digital broadcast satellite (DBS) using
the remote control of this system.
43
Operating a TV using the

remote control

Setting the manufacturer code
1
Slide the remote control
mode selector to [TV].
2
Hold down [TV F].
Remote control
mode selector • Hold down [TV F] until you finish step 4.
3
Press [ENTER] and release.
4
Press number buttons to enter the
manufacturer code.
Examples:
For a Hitachi TV: Press [1], then [0].
For a Toshiba TV: Press [0], then [8].
When the manufacturer of your TV has 2 or more
codes, select the manufacturer codes in turn and
Number
find the one that operates the TV and the remote
buttons/
control properly.
TV RETURN/
Manufacturer
100+
JVC
Hitachi
Magnavox
Mitsubishi
Panasonic
Philips
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
5
Release [TV F].
NOTE
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
TV produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Code
01
10
02
03
04, 11
15
05
12, 18, 19, 20, 21
13, 14
06, 16, 17
07
08
09