Setting Oven Controls; Setting The Clock; Changing Between 6-Hour Energy Saving Feature Or Continuous Bake Setting; Setting 12 Or 24 Hour Display Modes - Frigidaire FGGF3032MW Use And Care Manual

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first powered up or when the power
supply to the appliance has been interrupted and restored,
the display will flash the time of day. Be sure to set the
clock with the correct time of day before using the oven.
To set the clock when the display is flashing:
1. Press once. "CLO" will appear in the display.
2. Within 5 seconds, adjust the time by pressing the
or and release the keypad when the correct time
displays. The new setting will accept in 5 seconds.
To adjust the clock when the display is not flashing:
1. Press keypad twice (do not hold keypad down).
"CLO" will appear in the display.
2. Within 5 seconds, adjust the time by pressing the
or and release the keypad when the correct time
displays. Any adjustments made will accept in 5
seconds.
NOTE
The clock cannot be set or adjusted when the oven is
active including self-clean.
Changing between continuous bake setting
or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven may be
programmed to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press and hold
tone sounds. " — — hr" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press and hold
keypard for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
NOTE
Changing between continuous bake or 12-Hour Energy
savings mode does not change how the cooktop
operates.
14
keypad for 5 seconds until a
Changing temperature display mode
(°F or °C)
The oven control is factory preset to display the oven
temperature with Fahrenheit (°F) values. The control may
be changed to display either Fahrenheit or Celsius
temperatures.
To change the temperature to display Celsius (°C)
or Fahrenheit (°F):
1. Press keypad. "— —" appears in the display.
2. Press and hold the
the display.
3. Press and hold
the display.
4. Press the or
to °F.
5. Press any keypad to return to normal operating mode.
NOTE
The temperature display mode cannot be changed
when the oven or self-clean is active.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the oven control may be set for silent keypad
operation.
To set for silent operation:
Press and hold the
once (about 7 seconds). This will block the controls from
sounding when a keypad is pressed in the future.
To set for audible operation:
Press and hold the
once (about 7 seconds).
NOTE
When the control is set for silent keypad operation the
timer, preheat and any end of cycle or any error tone
alerts will remain audible.
keypad until "HI" appears in
keypad until °F or °C appears in
keypad to change °F to °C or °C
keypad until the control beeps
keypad until the control beeps