Changing Network Discovery Settings; Specifying Search Conditions - Kyocera TASKalfa 650c Operator's Manual

Changing Network Discovery Settings

When you use the e-Filing Backup/Restore Utility and connect to your same series MFP for the first time, or when
registering an additional same series MFP, you need to find the target MFP on the network.
P.11 "When you launch the e-Filing Backup/Restore Utility for the first time"
P.26 "Registering additional same series MFPs"
The search process may take a long time especially when a number of clients exist on the network. In this case, you can
narrow down the search conditions on the Discovery Settings dialog box.
P.27 "Specifying search conditions"
In addition, your attempt to find a same series MFP may fail due to the SNMP Network settings configured for the MFP. In
this case, open the SNMP Settings dialog box and verify and/or change the settings.
P.28 "Changing SNMP settings"
Ask the administrator for details on the SNMP Network settings configured for your same series MFP.

Specifying search conditions

If you want to specify the search conditions, click [Advanced] on the Local Discovery dialog box. On the Discovery
Settings dialog box that appears, make the following settings as required:
1
2
3
1) Devices
Click the arrow button to display the drop-down list box and select the check box(es) for the same series MFPs to be
searched for.
2) Network
"Enable IPX/SPX Search"
This is disabled because the Backup/Restore Utility does not support the IPX/SPX connection.
"Enable TCP/IP Search"
Select this option to search for same series MFPs on your TCP/IP network. This option is available only when the TCP/
IP protocols are installed on your computer. When this option is selected, you need to specify the detailed search
conditions for same series MFPs on the network.
- Search local subnet — Select this option to search for same series MFPs on the local subnet.
- Specify a range — Select this option to search for same series MFPs in a specific range of IPv4 or IPv6
addresses. When this option is selected, select IPv4 or IPv6 and enter specific IP addresses in the [From] and [To]
boxes.
3) [SNMP Settings]
Click this button when you need to verify and/or change the SNMP settings.
P.28 "Changing SNMP settings"
3 USEFUL FUNCTIONS AND SETTINGS

Changing Network Discovery Settings

27