Panasonic Viera TC-P50C2 Operating Instructions Manual page 27

42"/46"/50" class 720p plasma hdtv
Hide thumbs Also See for Viera TC-P50C2:
Table of Contents

Advertisement

(Continued)
• Menu
list
Menu
Item
'
Adjustments/Configurations
(alternatives)
Sets the mode to select the channel with the Channel up/down button.
Channel surf mode
Language
Clock
ANT/Cable
setup
Input labels
<
_>
r-
2
O_
Pixel orbiter
Time (minutes)
4:3 side bars
Scrolling bar
VIERA Link
No signal for 10
_
minutes
_3
<
_'
No activity
for 3
hours
_ _ Auto power on
Image
viewer
auto play
First time setup
About
(All/Favorite/Digital
only/Analog
only)
÷ Favorite:
Only channels
reqistered
as FAVORITE.
(p. 18)
Selects
the screen
menu language.
Adjusts
the clock.
(p. 16)
Sets channels.
(p. 36)
Selects
the terminal
and label of the external
equipment.
(p. 39)
Prevents "Image retention" with Wobbling. (Automatic/Periodic)
÷ Automatic: Shifts the display image automatically.
÷ Periodic:
Shifts the display image every (1/2/3/4) minutes according to what was set in
the "Time (minutes)" menu.
Sets the time for the "Pixel orbiter-Periodic" setting. (1121314)
Changes the brightness of the side bar (OfflDarklMidlBright)
(4:3 mode only)
÷ The recommended setting is "Bright" to prevent the panel "Image retention". (p. 46)
Press "OK" to start the horizontal "Scrolling" on the screen. (p. 46)
Controls the equipment connected to HDMI terminals. (Off/On) (p. 30)
÷ "Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
Power on link
Sets "Power on link" of the HDMI connected equipment. (No/Yes) (p. 30)
Power off link
Sets "Power off link" of the HDMI connected equipment. (No/Yes) (p. 30)
Energy saving
Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 30)
mode
Unselected device Sets "Unselected device energy save" of the HDMI connected equipment. (p. 30)
energy save
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakers
Selects the default speakers. (TV/Theater) (p. 30)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
÷ Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or "Digital
Channel" is selected.
÷ "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No signal for 10 minutes".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
÷ Not in use when "Auto power on" or "On/Off Timer" is set.
÷ "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Turns TV On automatically when the cable box or connected device is turned On (No/Yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
÷ The "Sleep"timer,"On/ Offtimer",and "Firsttime setup"will notfunctionif "Autopower on" is set. (p. 40)
Sets the "Thumbnail" or "Slideshow" to play back SD cards automatically.
Slideshow/Thumbnail/Set
later/Off)
Restarts the first time setup from "Language" setting. (p. 14)
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all settings made with Setup, such as channel settings. (p. 36)
• Sub menu
list
Menu
Item
Adjustments/Configurations(alternatives)
Sets the mode to select the channel with the Channel up/down button.
Channel
surf mode
(All/Favorite/Digital
only/Analog
only)
Set favorite
Sets favorite channels. (p. 19)
Edit CH caption
Changes the station identifier. (p. 37)
Signal meter
Checks the signal strength if interference or freezing occurs on a digital image. (p. 37)
@
.._. -r-
"c30
-_r-
-m
€-
m,_: t--
d'_ "m
q-., CO
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viera tc-p46c2Viera tc-p42c2

Table of Contents