Attaching The Paper Support And Output Tray - Epson Stylus 1500 Software Manual
Epson setup and software guide for windows ink jet printer stylus 1500
Hide thumbs
Also See for Stylus 1500:
- Service manual (185 pages) ,
- Reference manual (119 pages) ,
- Setup information manual (61 pages)
Table of Contents
Advertisement
Attaching the Paper Support and Output Tray
1. Attach the paper support by placing the hole on the right
side of the support over the right mounting post on the
printer. Then push the notch on the left side onto the left
mounting post.
2
2. Attach the output tray by fitting the notches on the tray
over the mounting posts, as shown below. Make sure the
output tray is locked firmly in place.
1
Setting Up the Printer
1-3
Advertisement
Table of Contents
