Net Member Address Parameter; Scan Channel List Parameters - Vertex Standard VX-1700 Series Service Manual

CE77 PC Programming Software

NET MEMBER ADDRESS PARAMETER

This parameter defines the network member address
to be called.
To enter the network nember address, select the net-
work from the pull-down list, then double click the
left mouse button on the desired bank to invoke a
pop-up window, select the desired address, then
click the [OK] button to accept the address.
Note: Please make sure that the "SELF ADDRESS"
setting position is not piled up the other transceiv-
er's setting, and does not duplicate the "SELF AD-
DRESS" setting to the other bank.

SCAN CHANNEL LIST PARAMETERS

This parameter defines the memory channel to be
scanned.
To program the list, select the network from the pull-
down list, then double click the left mouse button
on each memory channel to be included in the scan-
ning list.
If you put on the "Chn" radio button, indicate the
"N M A " P
Scan Channel by the "Frequency" display. Mean-
while, If you put on the "TAG" radio button, indi-
cate the Scan Channel by the "Alpha/numeric Tag"
display.
"S C L " P
43