Download Print this page

One For All URC 7800 Cinema 7 User Manual: Setup Codes For Tv/vcr Combos; Programming The Cinema 7 To Operate Your Dvd Or; Laser Disc Player; Setup Codes For Dvd Players

Hide thumbs

Advertisement

press POWER. The unit should turn off. If it does not
respond, Repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
TV/VCR Combo.
NOTE: If you have tried all the codes listed for your
brand and your TV/VCR Combo does not respond,
try using the search method found on page 22.
5.
Your Cinema 7+™ is now programmed to operate
your TV/VCR Combo. Write your TV/VCR Combo
code in the boxes to the left for future reference.
Remember, to use your Cinema 7+™ to operate your
TV/VCR Combo, press the VCR key first.

Setup Codes For TV/VCR Combos

American High
0035*
Brocksonic
0002, 0294, 0479
Colt
0072
Curtis Mathes
0035*
Daewoo
0278*
Emerson
0002, 0294, 0479
Funai
0000
GE
0035*, 0060*, 0048*, 0240
Hitachi
0035*, 0000
HQ
0000
Lloyds
0000
Magnavox
0000, 0035*, 0081*
Magnin
0240
Memorex
0037, 0162*
MGA
0240
Mitsubishi
0048*
Orion
0002, 0294, 0479
Panasonic
0035*, 0162*
Penney's
0035*, 0240, 0162*
Quasar
0035*, 0162*
RCA
0035*, 0060*, 0048*
Sansui
0000, 0479
Sanyo
0240
Sears
0000, 0037
Sony
0032*
Symphonic
0000
Zenith
0000
:
NOTE
If your TV/VCR works with one of the above codes highlight-
ed with an asterisk (*), you may need to program a separate TV
code to control the volume. Check the list of codes below and follow
the instructions in the "Programming the Cinema 7+™ to Operate
Your TV" section to program the supplied TV code.
TV/VCRs working on VCR code 0032 may require
TV code 0000 for volume control.
TV/VCRs working on VCR code 0035 may require
TV code 0051 for volume control.
TV/VCRs working on VCR code 0048 may require
TV code 0093 for volume control.
TV/VCRs working on VCR code 0060 may require
TV code 0047 for volume control.
TV/VCRs working on VCR code 0081 may require
TV code 0054 for volume control.
Web Site : http://www.oneforall.com
14
TV/VCRs working on VCR code 0162 may require
TV code 0250 for volume control.
TV/VCRs working on VCR code 0278 may require
TV code 0451 for volume control.
Programming the Cinema 7+™ to operate your DVD or
Laser Disc Player:
Locate the brand name of your DVD or Laser Disc Player in
the DVD or Laser Disc Player setup codes (starting below),
and write it in the space below.
DVD/LD Player Brand: ______________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first. You will use one of these codes to pro-
gram your Cinema 7+™ to operate your DVD or Laser Disc
Player as follows:
1.
Turn on your DVD or Laser Disc Player and insert a
disc.
2.
Press DVD/LD and release. Press and hold SETUP
until the Cinema 7+™'s red light blinks twice, then
release SETUP.
3.
Enter the first four-digit DVD or Laser Disc Player
code listed for your brand. If performed correctly, the
red light will blink twice when entering the final digit.
4.
Aim the Cinema 7+™ at your DVD or LaserDisc
Player and press POWER. Your DVD or Laser Disc
Player should turn off. If it does not respond, repeat
steps 2-4, trying each code listed for your brand until
you find the one that works.
NOTE: If you have tried all the codes listed for your
brand and your DVD or Laser Disc Player does not
respond, try using the search method found on page
22.
5.
Your Cinema 7+™ is now programmed to operate your
DVD or Laser Disc Player. Write your DVD or Laser
Disc Player code in the boxes to the left for future refer-
ence.
Remember, to use Cinema 7+™ to operate your DVD or
Laser Disc Player, press the DVD/LD key first.
Setup Codes for DVD Players
JVC
0558
Kenwood
0534
Magnavox
0503
Mitsubishi
0521
Onkyo
0503
Panasonic
0490
Philips
0539, 0503
Pioneer
0525, 0571
Proscan
0522
RCA
0522
Samsung
0573
Sony
0533
Technics
0490
Toshiba
0503
Yamaha
0490, 0545
Zenith
0503
Setup Codes for Laser Disc Players
Web Site : http://www.oneforall.com
15

Advertisement

   Also See for One for All URC 7800 Cinema 7

Comments to this Manuals

Symbols: 0
Latest comments: