Gathering Additional Information; Table 3 Environmental Changes - HP SN3000B Troubleshooting Manual

Troubleshooting and diagnostics guide
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

Gathering additional information

Below are features that require you to gather additional information. The additional information is
necessary in order for your switch support provider to effectively and efficiently troubleshoot your
issue. Refer to the chapter or document specified for the commands whose data you must capture:
Fabric OS Troubleshooting and Diagnostics Guide
53-1002150-02
Host information:
-
OS version and patch level
-
HBA type
-
HBA firmware version
-
HBA driver version
-
Configuration settings
Storage information:
-
Disk/tape type
-
Disk/tape firmware level
-
Controller type
-
Controller firmware level
-
Configuration settings
-
Storage software (such as EMC Control Center, Veritas SPC, etc.)
If this is a Brocade DCX, DCX 8510 family, and DCX-4S enterprise-class platforms, are the CPs
in-sync? Yes or no.
Use the haShow command to determine the answer.
List out when and what were the last actions or changes made to the switch, the fabric, and
the SAN or metaSAN.
In
Table
3, list the environmental changes added to the network.
TABLE 3
Environmental changes
Type of Change
Configurations, see
Chapter 3,
Firmwaredownload, see
Chapter 5, "Firmware Download
Trunking, see
Chapter 8, "ISL
Zoning, see
Chapter 9,
"Zoning".
FCIP tunnels, refer to the Fibre Channel over IP Administrator's Guide.
FICON, refer to the FICON Administrator's Guide.
Building a case for your switch support provider
"Connectivity".
Trunking".
Date when change occurred
Errors".
1
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade bladesystem 4/24Fabric os 7.0.0

Table of Contents