Overview Of The Data Exchange Code Converter Installation; Installation Media For Unix-Based Systems; Installation Overview; Code Converter Utility Files For Unix Systems - HP StorageWorks P9000 User Manual

Overview of the Data Exchange Code Converter Installation

The following figure shows an overview of the Data Exchange Code Converter installation process.
In order to use the Data Exchange Code Converter, you must first install the File Conversion Utility
(FCU) and then install Code Converter. For details on installing the File Conversion Utility, see the HP
StorageWorks P9000 Data Exchange User Guide.
Figure 14 Installation Overview
.

Installation Media for UNIX-based Systems

The Data Exchange Code Converter Installation Utility files for UNIX systems are listed in the following
table. Data Exchange Code Converter provides the following files in tar (tape archive) format. These
files are contained in an accompanying compact disk.
Table 2 Code Converter Utility Files for UNIX Systems
File Name
(Note 1)
libuoc.*
codetran.ini
HOSTBIG5.tbl
BIG5HOST.tbl
EditOpFile
30 System Requirements and Installation
UOC double-byte conversion function's object. Replace with a dummy
object provided by FAL/FCU.
ini file used by the double-byte code conversion routine
IBM Traditional Chinese–>Big5
conversion table
Big5–>IBM Traditional Chinese
conversion table
Edit Option file
Contents
standard table for mto conversion
standard table for otm conversion
Installation
Location
/usr/lib
FAL/FCU boot
directory