HP StorageWorks P9000 Manual page 93

Table 19 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS0x) (continued)
Message ID
YKS098E MSG SC=36
RC=36
YKS099I MSG TSO
SC=max-severity
RC=max-value
Table 20 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS2x)
Message ID
YKS203E TSO RC=52
YKS203E TSO RC=52
YKS250E MSG SC=36
RC=36
YKS260E MSG SC=44
RC=44
Message Text
Specified STEM() is not
CopyGroup object.
YKSTORE Processing Complete.
Message Text
Invoke YKSTORE REXX Script via
YKSTORE Assembler subroutine.
The MSG(stem) value cannot be
acquired in the caller's
environment. (YKVGET result =
result)
The value value of the variable
name is an invalid format.
Too long record:record.
Explanation and Recommended Actions
The prefix of the REXX variable name specified in the
STEM parameter does not comply with the copy group
structure described in the HP StorageWorks P9000 for
Business Continuity Manager Software Reference Guide.
YKSTORE command processing has completed.
This message is always displayed.
max-severity
Maximum value among the output
severity codes
max-value
Maximum value among the output
return codes
Explanation and Recommended Actions
The YKSTORE REXX program can only be invoked via the
YKSTORE assembler REXX subroutine. This message
indicates the most likely cause of the error indicated in
the previous YKS203E message.
An attempt to acquire the variable value of the Message
structure failed with the result value identified by result.
This implies that the YKSTORE REXX subroutine has not
properly been invoked or that Business Continuity
Manager has not properly been installed.
stem
Stem name assigned to the MSG
parameter
The value value of the variable identified by name is
invalid.
An attempt to output record to a dataset failed because
record was too long.
Correct the variable setting so that the length of record
becomes 256 characters or shorter.
List of Messages 93