HP StorageWorks P9000 Manual page 88

Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x) (continued)
Message ID
YKQ019W MSG
SC=12 RC=0
(pair-index)
YKQ021E MSG
SC=12 RC=20
(pair-index)
88 Messages
Message Text
Primary volume serial changed.
DEVN device#(SN,CU#,CCA#)
TCA or BC Z Primary is simplex,
secondary not. DEVN
device#(SN,CU#,CCA#)
Explanation and Recommended Actions
Although the P-VOL is online, the current volume serial
number does not match the volume serial number defined
for the copy group. Processing will continue.
Check that the copy group indicates the correct volumes
and is not being used for other purposes.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
Check that the S-VOL status is SIMPLEX.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.