HP StorageWorks P9000 Manual page 63

Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID Message Text
YKL006E MSG Unable to execute without
SC=48 RC=48 valid PREFIX parameter.
YKL007E MSG Unable to execute without
SC=48 RC=48 valid GROUP parameter.
YKL050W MSG Unrecognized element
SC=4 RC=4 encountered: name
(file:rec#)
YKL051E MSG End of file encountered in
SC=36 RC=36 comment.
(file:rec#)
YKL053W MSG Unrecognized Version
SC=4 RC=4 attribute value: value
(file:rec#)
Explanation and Recommended Actions
Specify a valid PREFIX parameter.
Specify a valid GROUP parameter.
Correct the specification on the line with the line number identified
by rec# in the file identified by file. If the error still exists, contact
technical support for assistance.
name
XML element name
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
Check that the XML comments are balanced. Be careful to ensure
that any XML comments will not be nested. If the error still exists,
contact technical support for assistance.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The system does not recognize the version attribute value of the
XML element that exists on the line with the line number identified
by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
List of Messages 63