HP StorageWorks P9000 Manual page 45

Table 7 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG0x) (continued)
Message ID Message Text
YKG090E MSG File Allocation Failed: dsstate.
SC=40 RC=40
(file)
YKG091E MSG File Deallocation Failed:
SC=40 RC=40 dsstate.
(file)
YKG092E MSG File Read error: dsstate.
SC=40 RC=40
(file)
YKG099I MSG YKGETHDA command return
TSO code=max-value,reason
code=reason-code.
Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x)
Message ID Message Text
YKG201E MSG Unable to execute without
SC=48 RC=48 valid name parameter.
YKG202E TSO "SYSAUTH". cannot be
RC=48 specified in MSG()
parameter.
YKG203E MSG "SYSAUTH." cannot be
SC=48 RC=48 specified in STEM()
parameter.
YKG204E TSO name parameter is too long.
RC=48
YKG205E MSG name parameter is too long.
SC=48 RC=48
Explanation and Recommended Actions
An attempt to allocate the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
An attempt to deallocate the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
An attempt to read the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
The reading of the disk configuration definition file has finished.
This message is issued when an invalid disk configuration definition
file is read in ISPF. If this message cannot be output to the REXX
structure, it is output to the TSO/E terminal.
reasoncode
Reason code for the returned max-value
max-value
Maximum value among the output return codes
Explanation and Recommended Actions
Nothing or an invalid value is assigned to the parameter identified
by name.
SYSAUTH. cannot be specified in the MSG parameter. Specify a
different name.
SYSAUTH. cannot be specified for the STEM parameter. Specify
a different name.
The parameter identified by name is too long.
The parameter identified by name is too long.
List of Messages 45