HP StorageWorks P9000 Manual page 39

Table 5 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKE0x) (continued)
Message ID Message Text
YKE003E MSG Unexpected transition of
SC=8 RC=8 group copy-group pair index
to state state.
YKE008E MSG DEVN() not valid hex
SC=48
YKE010E TSO REXX failure return
RC=40 code=nnnn starting with
variable name
YKE099I TSO YKEWAIT command return
code=nnnn, reason
code=rrrr
Table 6 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKF0x)
Message ID Message Text
YKF000T TSO Supplied parameters invalid
RC=48
YKF001E TSO No message MSG() supplied
RC=48
YKF001E MSG No results STEM() supplied
SC=48 RC=48
YKF002E MSG Copy Group STEM(stem)
SC=48 RC=48 does not include trailing "."
Explanation and Recommended Actions
The copy pair in the copy group entered an unexpected status.
Check that the status to be monitored is correctly specified.
copy-group
Copy group ID
index
Pair index
Before version 2.0: Copy pair number
Version 2.0 or later: Copy group number and copy pair number
For details about identifying a volume with the copy group number
and the copy pair number, see
Processed" (page 188).
state
The status after the transition
The value specified in the DEVN parameter is not in hexadecimal
format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
The YKEWAIT command terminated with the return code nnnn and
the reason code rrrr.
This message is always displayed to indicate the return code and
the reason code.
nnnn
Maximum among the severity codes returned
during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKF099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
"Identifying the Volume to Be
List of Messages 39