HP StorageWorks P9000 Manual page 233

Table 60 Details of Error Codes C1xx
Error Error Details
Code
An attempt to establish a path has
C120
failed because the number of RCUs
registered in the MCU exceeds
four.
The command could not be
C122
executed because the specified
RCU parameter is invalid.
The specified RCU is not registered
C123
(the path is not established).
The command to delete a path
C126
could not be executed because
there is a Cnt Ac-S Z, TCA, or Cnt
Ac-J Z copy pair or journal volume
in the target CU.
An attempt to establish or delete
C127
some of the specified multiple paths
has failed. Possible reasons include
one or more of the following:
The specified parameter is
invalid.
The port or MP status is
abnormal.
A cable is not connected
properly.
The specified port is invalid.
An attempt to establish or delete
C128
all the specified multiple paths has
failed. Possible reasons include one
or more of the following:
The specified parameter is
invalid.
The port or MP status is
abnormal.
A cable is not connected
properly.
The specified port is invalid.
The command could not be
C129
executed because the number of
SSIDs registered in the RCU
exceeds four.
The command could not be
C12A
executed because the
device-identifying code of an RCU
for which path deletion is specified
is invalid, or because the RCU type
(FIBRE/ESCON) is invalid.
The command could not be
C12B
executed because there are one or
more paths that have a different
serial number.
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Details of Error Codes 233
PATH Others
Output Not
output
Output Not
output
Output Not
output
Output Not
output
Output Not
output
Output Not
output
Output Not
output
Output Not
output
Output Not
output