HP StorageWorks P9000 Manual page 221

Table 57 Details of Error Codes 8Dxx (continued)
Error Error Details
Code
A Cnt Ac-S Z or TCA copy pair
8D29
cannot be suspended. Possible
reasons include one or more of the
following:
The specified volume is in the
SIMPLEX status.
The P-VOL number in the
parameter and bootup volume
number do not match.
The S-VOL number in the
parameter is incorrect.
The serial number or SSID of the
primary storage system in the
parameter does not match the
storage system serial number or
SSID of the local CU.
The serial number or SSID of the
secondary storage system in the
parameter does not match the
storage system serial number or
SSID of the RCU.
The S-VOL number in the
parameter and bootup volume
number do not match.
The serial number or SSID of the
secondary storage system in the
parameter does not match the
storage system serial number or
SSID of the local CU.
SVOL(PERMIT)/Reverse
Resync is not supported.
The specified volume is the
P-VOL.
It is already in the suspend
status.
The S-VOL is in the Pending
status.
The status is invalid.
The status of the copy pair is
being changed.
A BC Z copy pair cannot be
8D2A
suspended. Possible reasons
include one or more of the
following:
The status of the copy pair does
not allow the status transition.
For details, see error code
2310.
The copy pair is in the SIMPLEX
status.
The copy pair is in the Split
status.
The specified C/T group ID is
not registered.
Type of Error
BC Z Cnt Ac-S Z
Not Output
output
Output Not output
TCA Cnt Ac-J Z CMD
Not output
Details of Error Codes 221
PATH Others