HP StorageWorks P9000 Manual page 191

Table 48 Details of Error Codes 23xx
Error Error Details
Code
The command could not be executed
2301
because a BC Z program product has
not been installed.
The command could not be executed
2309
because an attempt was made to
make a copy pair that exceeded the
maximum number of BC Z copy pairs.
A BC Z copy pair status cannot be
2310
changed because the status of the
copy pair does not allow a status
transition. The reason might be one
of the following:
The combination of the request
command and the status of the
specified copy pair do not allow
the status transition. For
information on combinations, see
the Business Copy for Mainframe
Systems User Guide for the disk
array.
The copy pairs cannot be
suspended collectively because a
copy pair that is not in the DUPLEX
status is among the specified copy
pairs.
The copy pairs cannot be
suspended collectively because a
copy pair for which transition is
not possible is among the specified
copy pairs.
An ATTIME suspend time cannot
be set because a copy pair that is
not in the PENDING or DUPLEX
status is included in the C/T group.
The copy pair cannot be dissolved
2311
because the copy pair is in the
SIMPLEX status.
The command could not be executed
2312
because the S-VOL of a BC Z copy
pair is online.
An BC Z copy pair cannot be
2313
suspended because the copy pair is
in the Split status.
A BC Z copy pair cannot be made
2314
because the copy pair is in the Split
status.
A BC Z copy pair status cannot be
231B
changed. The reason might be one of
the following:
The status of another copy pair
that shares the P-VOL is SUSPVS.
There is a FlashCopy pair that
shares the P-VOL.
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Cnt Ac-J Z CMD PATH
Details of Error Codes
Others
191