HP StorageWorks P9000 Manual page 166

Table 42 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ29x) (continued)
Message ID
YKZ299E MSG SC=36
RC=36
166 Messages
Message Text
Definition of xxxxxxxx does not
match the actual configuration.
(JNLG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss, CDEV=cccc)
Explanation and Recommended Actions
EXCTG information defined in the copy group and
EXCTG information registered in the storage system
do not match.
Correct the copy group definition file. This message
might be output when the EXCTG ID specified in the
copy group definition is being used by another copy
group.
After removing the cause of the problem, execute the
YKMAKE command again with a SELECT(COND)
specification to register the journal group to EXCTG.
This message is output until the corresponding EXCTG
registration process is executed using the YKMAKE
command again.
xxxxxxxx
Items that do not match
CDEV: Arbitration command
device number
JNLG: The storage system serial
number identified by ssssssssssss
and the journal group number
identified by jj is registered to the
EXCTG indicated by e. However,
it was not found in the
configuration file.
JNLG (string)
The journal type registered to the
storage system (the journal type
of the storage system, rather than
of the definition)
R-JNL: Journal of the secondary
site
M-JNL: Journal of the primary site
jj (hexadecimal number)
The journal group number
registered to the storage system
(00-FF)
m (decimal number)
The mirror ID registered to the
storage system (0-3)