HP StorageWorks P9000 Manual page 12

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID
YK8040I PRT CON
YK8041I PRT CON
YK8042I PRT CON
YK8043I PRT CON
YK8044I PRT CON
YK8045I PRT CON
12 Messages
Message Text
time BCM Monitor will stop
at STOPPOINT 'label'.
time BCM Monitor will stop
at the end of monitor cycle.
time BCM Monitor will sleep
at STOPPOINT 'label' for
max 'sleep-time' minutes.
time STOPPOINT 'label'
reached.
time BCM Monitor will sleep
now for max 'sleep-time'
minutes.
time BCM Monitor reached
the end of the monitoring
cycle.
Explanation and Recommended Actions
BCM Monitor will stop at the point label.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
label
Label at which BCM Monitor stops
BCM Monitor will stop at the end of a cycle.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will go to sleep at the point label.
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
label
Label at which BCM Monitor goes to sleep
sleep-time
Sleep duration
BCM Monitor has reached the point label.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will sleep for the duration identified by sleep-time.
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
sleep-time
Sleep duration
BCM Monitor has reached the end of a cycle.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.