Add Route Entry Panel
In the Inner Route Information panel, move the cursor to the appropriate field and press F5=Add.
The Add Route Entry panel for adding a DAD ID to lengthen the selected route is displayed.
Figure 37 (page 49)
Figure 37 Add Route Entry Panel
Table 27 (page 49)
Table 27 Contents of the Add Route Entry Panel
Item
AC
Device Address Domain
Add Remote Route Entry Panel
In the Inner Route Information panel, press F6=Remote . The Add Remote Route Entry panel for
specifying information about a storage system to be remotely scanned is displayed.
Figure 38 (page 49)
Figure 38 Add Remote Route Entry Panel
Table 28 (page 50)
shows the Add Route Entry panel.
describes the items in the Add Route Entry panel.
Description
Specify an action
s: Selects a DAD ID to be connected to the route
Selectable DAD ID
shows the Add Remote Route Entry panel.
describes the items in the Add Remote Route Entry panel.
Discover/Define Configuration Panel (Configuration File Definition)
49