Sort Command; Scanpair Command; Errcode Command; Commands That Can Be Used On The Command Line - HP StorageWorks P9000 Reference Manual

NOTE: If you specify three parameters, the command interpreter assumes that the field name is
specified. If you specify two parameters, the command interpreter assumes that the field name is
omitted.

SORT Command

Function
List items, displayed in a panel, are sorted by the SORT command based on the
specified field names. The sort order (ascending or descending) is defined for each
selected field.
Format
SORTΔ[field-name]
Parameter
field-name
For details about the specifiable field names and sort order, see the descriptions
for each panel. If you omit the field name, a pop-up panel will appear and you
can specify the sort key.
NOTE: If you specify a field name, you cannot sort on multiple items. If you specify an invalid
field name, a pop-up panel for specifying the sort key is displayed.

SCANPAIR Command

Function
The SCANPAIR command displays the Scan Copy Pair Inside Storage System panel
that scans volumes of PPRC copy pairs.
Format
SCANPAIR

ERRCODE Command

Function
The ERRCODE command displays the Error Code Help panel. If you enter an error
code on this panel, you can view the details for that error code. For details about
the Error Code Help panel, see
Note that, on the Exception Message Panel, if you place the cursor on an error
code that is within the displayed message, and then execute the ERRCODE
command, the details for that error code will be displayed in the Error Code Help
Panel. For details on the Exception Message Panel, see
(page
Format
ERRCODE

Commands that Can Be Used on the Command Line

Table 2 (page 14)
the command line.
16).
lists, in alphabetical order by panel name, which commands can be used on
"Error Code Help Panel" (page 18).
"Exception Message Panel"
Overview of ISPF Panels 13