HP StorageWorks P9000 Reference Manual page 117

Table 73 Contents of the Manage Copy Groups Panel
Item Description
AC Specify an action.
l: Executes the YKLOAD command to load copy groups.
q: Executes the YKQUERY command to display the copy pair volume status.
m: Executes the YKMAKE command to create copy pairs.
u: Executes the YKSUSPND command to suspend copy pairs.
r: Executes the YKRESYNC command to resynchronize copy pairs.
d: Executes the YKDELETE command to dissolve copy pairs.
w: Executes the YKWATCH command to monitor the copy pair status change.
e: Executes the YKEWAIT command to monitor the copy pair status change.
c: Executes the YKRECVER command to dissolve copy pairs from the secondary
site.
v: Execute the YKQUERY command with the VERIFY parameter specified.
f: Executes the YKEWAIT command with the TIMEOUT(0) parameter specified.
If there are many copy pairs, you can obtain the volume status more quickly by
specifying f in AC, rather than by specifying q.
Copy Group ID Copy group ID
Status Result of action specified in AC:
NOT LOADED: The copy group has not been loaded.
LOAD ERROR RC = xx
LOADED WITH WARNINGS RC = xx: The copy group has been loaded with
warning attached.
LOADED: The copy group has been loaded.
ESTABLISH ERRORS. YKMAKE RC = xx: making of a copy pair failed.
ESTABLISHED: making of a copy pair requested.
ESTABLISHED(HOLD): making of a copy pair with HOLD specified was
requested.
SUSPEND ERRORS. YKSUSPND RC = xx: suspending of a copy pair failed.
SUSPENDING: suspending of a copy pair requested.
RESYNC ERRORS. YKRESYNC RC = xx: synchronizing of a copy pair failed.
RESYNC PENDING: pending of the synchronizing of a copy pair requested.
QUERY ERRORS. YKQUERY RC = xx: acquiring a copy pair status failed.
QUERY ERRORS. YKEWAIT RC = xx: acquiring a copy pair status failed.
QUERIED SUCCESSFULLY: copy pair status was acquired.
DISSOLVE ERRORS. YKDELETE RC = xx: dissolving a copy pair failed.
PAIRS DISSOLVED: dissolving a copy pair requested.
EWAIT ERRORS. YKEWAIT RC = xx: monitoring volume status failed.
EWAIT GOTO(status
volume status.
RECOVER ERRORS. YKRECVER RC = xx: an attempt to dissolve the copy pair
from the secondary site has failed.
RECOVER SUCCESSFULLY: a request was made to dissolve the copy pair from
the secondary site.
1 An error occurs if an attempt is made to load a copy group definition file that was not created by Business Continuity
Manager.
2 The following list describes the differences between specifying q and f in AC:
2, 3
4
: An error occurred during loading the copy group.
5
) SUCCESSFULLY: The volume has moved to the specified
Manage Copy Groups Panel (Copy Group Operation)
1
1
1
1 17