Executing Ykload - HP StorageWorks P9000 Reference Manual
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Table 70 Contents of the Manage Path Set Panel
Item
AC
Path Set ID
Status
1
xx is a return code from each command.
NOTE:
Status displays the execution result of the action specified for AC. If you specify q for AC,
then the YKQRYPTH command is executed, and the status of each logical path that has been defined
in the path set is displayed in the Path Set Status panel. If you press the F3=Exit key to exit the Path
Set Status panel, Status in the Manage Path Set panel displays the execution result of the YKQRYPTH
command that was executed to display the Path Set Status panel.
Executing YKLOAD
When 1 is specified for the AC column in the Manage Path Set panel, the YKLOAD command (for
loading a path set) is executed. At this point, the LOAD Option panel is displayed for specifying
parameters for the YKLOAD command.
Figure 95 (page 111)
1 10
ISPF Panels
Description
Specify an action.
l: Executes the YKLOAD command and loads a path set.
b: Executes the YKBLDPTH command, and establishes all logical paths in the selected
path set.
d: Executes the YKBLDPTH command, and deletes all logical paths in the selected
path set.
q: Executes the YKQRYPTH command, and displays the status of all logical paths in
the selected path set. The Path Set Status panel will be displayed.
c: Executes the YKQRYPTH command with the RESTRUCT parameter specified.
When actions are entered in multiple AC columns, the actions are carried out in the order
displayed.
Path set ID
Execution result of the action specified for AC
NOT LOADED: the path set has not been loaded.
1
: An error occurred during loading the path set.
LOAD ERROR RC=xx
LOADED WITH WARNINGS RC=xx: The path set has not been loaded, but with
warnings.
LOADED: Loading the path set was successful.
Action-name SUCCESSFULLY: The action indicated by action-name was successful.
Action-name WARNINGS command-name RC= xx: A warning occurred with the
command indicated by command-name, in the action indicated by action-name.
Action-name WITH WARNINGS command-name RC=xx: The command indicated by
command-name within the action indicated by action-name generated an error
message.
Action-name ERRORS command-name RC= xx The command indicated by
command-name terminated with an error.
shows the LOAD Option panel when a path set is loaded.
Advertisement
Table of Contents
