Lun Management Window - HP StorageWorks MPX200 User Manual

1. To properly setup LUN masking, create a group that includes the WWNs from a single Virtual
Port Group (VPG).
To identify which WWNs belong to a VPG see the fourth bit (circled in the
create up to four groups, each containing WWNs from each VPG from each MPX200 blade.
LUNs can be created and assigned to the groups at this time.
Figure 36 LUN management window
.
2. Install the Microsoft iSCSI Initiator software. For Windows Server 2008, the iSCSI initiator is
included with the operating system.
For Windows Server 2003, you must install the iSCSI initiator. For Windows Server 2003, the
Microsoft iSCSI initiator installation presents an option for installing MPIO using the Microsoft
generic DSM (Microsoft MPIO Multipathing Support for iSCSI check box). For Windows Server
2008, MPIO is installed separately as a feature.
3. See "Setting up the iSCSI
name.
4. Install and run the mpx Manager.
50 Managing the MPX200 for XP 24000/20000
initiator" on page 60 to set up the Windows host and register the IQN
Figure 36). You can