Gap Adjustment; Fig. 17 Loading Of Roll Paper (2); Fig. 18 Loading Of Roll Paper (3) - Epson M X - 8 5 Operation Manual

7. Gap Adjustment

It is possible to adjust the gap between the print head and platen to accommodate
various thicknesses of form and print density.
The head adjusting lever is located on the left side frame of the print mechanism.
Move forward to widen gap.
Move rearward to narrow gap.
This also be used to compensate for decreased print density due to ribbon
lever can
wear after extended usage.
Loading of Rool Paper (2)
Fig. 17
Loading of Roll Paper (3)
Fig. 18
- 1 8 -
Roll Paper
Manual Paper Feed Knob