Integrated Peripherals - Gigabyte GA-EP41-UD3L User Manual

Lga775 socket motherboard for intel core processor family/ intel pentium processor family/intel celeron processor family
Table of Contents

Advertisement

2-6

Integrated Peripherals

On-Chip Primary PCI IDE
On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
Azalia Codec
Onboard H/W LAN
Green LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Mouse Function
USB Storage Function
higf : Move
Enter: Select
F5: Previous Values
On-Chip Primary PCI IDE
Enables or disables the first integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
This item is configurable only if the On-Chip SATA Mode is set to Combined.
Ch.0 Master/Slave
Ch.1 Master/Slave
Disabled
SATA Port 0/2 Set to
This value is dependent on the On-Chip SATA Mode and PATA IDE Set to settings.
When PATA IDE Set to is configured to Ch. 1 Master/Slave, this option will be automatically set to Ch. 0
Master/Slave.
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the integrated SATA controller.
Lets the BIOS set SATA devices to Combined or Enhanced mode.
If your onboard SATA controller is automatically configured to Combined mode,
you can manually re-configure it to Enhanced mode as needed. (Default)
Sets all SATA devices to operate in PATA mode. Combined allows a maximum
of 4 ATA devices to be used simultaneously: two PATA devices plus two SATA
devices.
Sets all SATA devices to operate in SATA mode.
Sets all SATA devices to operate in PATA mode and disables the integrated IDE
controller.
Sets the IDE channels to Ch. 0 Master/Slave. (Default)
Sets the IDE channels to Ch. 1 Master/Slave.
Disables the integrated IDE controller when Non-Combined is selected.
[Enabled]
[Auto]
Ch.0 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Auto]
[Enabled]
[Disabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
F10: Save
- 46 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-ep41-us3l

Table of Contents