Exporting And Importing Configuration Files - Lexmark X463 Administrator's Manual

4
Configure or verify the following settings:
•
Server Address—The IP address or hostname of the LDAP server where authentication will be performed.
•
Server Port—The port number the Embedded Web Server will use to communicate with the LDAP server. The
default port is 389.
•
Use SSL/TLS— Select None.
• LDAP Certificate Verification—Select Allow.
• Use GSSAPI— The check box should be empty.
• Mail Attribute—The mail attribute of the LDAP server.
•
Search Base— The search base used on the LDAP server.
•
Search Timeout— Can be from 5 to 300 seconds.
• Use user credentials— The check box should be empty.
5
Click Submit to save changes or Reset Form to clear all fields.
Device Credentials
From the Embedded Web Server, click Settings  Security  Edit Security Setups.
1
2
Under Edit Building Blocks, select LDAP.
Under Settings, click Address Book Setup  Device Credentials.
3
4
Configure or verify the following settings:
• Anonymous LDAP Bind—This check box should be empty.
•
Distinguished Name— The distinguished name of the print server(s).
•
MFP's Password— The password for the print server(s).
5
Click Submit to save changes or Reset Form to clear all fields.
Specifying the Domain Search Order
Your printer will use the Domain Search Order list to locate devices and resources residing in different domains on your
network.
From the Embedded Web Server, click Settings  Network/Ports  TCP/IP.
1
2
In the Domain Search Order box, type the names of all domains found on your network.
3
Click Submit.

Exporting and importing configuration files

After configuring an application, you can export your current settings into a file that can then be imported and used to
configure that application on one or more additional printers.
When you export a configuration file for this application, any bar code templates created with Bar Code Discovery will
be included in the file.
For more information on purchasing Bar Code Discovery, contact your Lexmark representative.
Configuring the application
18