YHi LT32C1M1 Service Manual page 14

Functions & OSD Operation
2.9 Power Supply specification & Power Management
Power Supply specification
Vendor
Input Voltage Range
Input Frequency Range
Output Voltage
Output Current
Power Dissipation
Efficiency
Power Saving Operation Method
Power Consumption
Power saving recovery Time
FSP FSP232-4M01 (first source)
AC 90 - 264 Vac
47/63 Hz
5V, 16V, 24V+ 5%
1.2A(5V), 5.5A(12V), 5.5A(24V)
-232W (max.)
80% MIN. AT FULL LOAD, (C.V MODE),
NOMINAL LINE, (110V-220V)
MEASURED AFTER 30MINUTES FULL
LOAD BURN-IN
VESA DPMS Signaling
ON Mode < 232 W (max)
ACTIVE OFF < 5W
ON Mode = N/A
ACTIVE OFF < 3 sec
2.10 Power Management
This monitor will incorporate power saving modes when "power saving" is enabled via
the and in response to VESA DPMS power saving signals from the host CPU. It is
required that the monitor will respond identically to the VESA DPMS standby, suspend,
and sleep modes with a common low power mode.
1
2
3
On Normal Green Normal
Suspend No Display Amber < 5W
Off No Display Red < 5W