Download Print this page
Graco 223–390 Instructions-Parts List
Graco 223–390 Instructions-Parts List

Graco 223–390 Instructions-Parts List

Spray gun extension 4050 psi (280 bar) maximum working pressure

Advertisement

Quick Links

INSTRUCTIONS-PARTS LIST
SPRAY GUN EXTENSION
4050 psi (280 bar) MAXIMUM WORKING PRESSURE
Model 223–390
Model 223–391
Model 223–392
Fits all Graco high pressure spray guns.
(Adapters available for other guns)
Includes DripLess
Tip Guard.
Order spray tip separately.
Pressure Relief Procedure
To reduce the risk of serious bodily injury, including
fluid injection, splashing fluid or solvent in the eyes or
on the skin, or injury from moving parts or electric
shock, follow this procedure whenever you shut off
the sprayer, when checking or servicing any part of
the spray system, when installing, cleaning or chang-
ing spray tips, and whenever you stop spraying.
1. Engage the gun safety latch.
2. Shut off the pump and unplug it (or disconnect the
spark plug).
Hazard of Using Fluids Containing Halogenated Hydrocarbons
Never use 1,1, 1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids con-
taining such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibil-
ity of explosion, which could cause death, serious bodily injury and/or substantial property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
This manual contains IMPORTANT
INSTRUCTIONS and WARNINGS.
READ AND RETAIN FOR REFERENCE.
12 in. (305 mm) long
18 in. (457 mm) long
24 in. (610 mm) long
COPYRIGHT 1990, GRACO INC.
WARNING
3. Disengage the gun safety latch. Hold metal spray
extension firmly to the side of a grounded metal
pail, and trigger the gun to relieve pressure.
4. Engage the gun safety latch.
5. Open the sprayer's pressure drain valve, having a
container ready to catch the drainage. Leave the
valve open until you are ready to spray again.
If you suspect that the spray tip or hose is com -
pletely clogged, or that pressure has not been fully
relieved after following the steps above, VERY
SLOWLY loosen the tip retainer nut or hose end cou-
pling to relieve pressure gradually, then loosen com-
pletely. Now clear the tip or hose.
WARNING
308–011
Rev A
GUN NOT INCLUDED

Advertisement

loading

Summary of Contents for Graco 223–390

  • Page 1 Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts. GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 COPYRIGHT 1990, GRACO INC.
  • Page 2: Parts List

    SwitchTip is size 513. Factory Branches: Atlanta, Chicago, Dallas, Detroit, Los Angeles, West Caldwell (N.J.) Subsidiary and Affiliate Companies: Canada; England; Switzerland; France; Germany; Hong Kong; Japan GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 PRINTED IN U.S.A. 308–011 2–90...

This manual is also suitable for:

223–391223–392