Gigabyte GA-7VT600 User Manual page 98

Is memory LED on and CPU fan running?
Turn off the system. Reboot after keyboard and mouse have
been plugged in.
Check if keyboard is working properly.
Press <Del> to enter BIOS setup. Choose "Load
Optimized Defaults" and save then exit setup.
Turn off the system and re-connect the IDE cable.
Check if the system can reboot successfully.
Reinstall Windows OS, and reinstall add-on cards and cables.
Then try to reboot the system.
If the above procedure unable to solve your problem, please contact with your local retailer or national
distributor for help. Or, you could submit your question to the service mail via Gigabyte website
technical support zone
(http://www.gigabyte.com.tw). The appropriate response will be provided ASAP.
GA-7VT600(-L) Motherboard
A
Yes
Check if there is display.
Yes
Yes
Yes
END
- 94 -
The problem could
be caused by
power supply,
CPU, memory or
No
CPU/memory
socket itself.
Failure has been excluded.
Perhaps your VGA
No
card / VGA slot or
monitor is defective.
Failure has been excluded.
It is possible that
No your keyboard or
keyboard
connector is
defective.
Failure has been excluded.
The problem was
No
probably caused
by the IDE device
/ connector or
cable.
Failure has been excluded.