Resume By Alarm - Gigabyte GA-7VT600 User Manual

PME Event Wake up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disabled
Enabled
ModemRingOn/WakeOnLAN
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake up".
An incoming call via modem awakes the system from its soft-off mode. When set at Enabled, an input
signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
Disabled
Enabled

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Enabled
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :
Disabled PME Event Wake up function.
Enabled PME Event Wake up function. (Default Value)
(When AC Back Function set to [Soft-Off])
Disabled Modem Ring On / Wake On LAN function.
Enabled Modem Ring On / Wake On LAN function. (Default Value)
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(0~23) : (0~59) : (0~59)
- 45 -
BIOS Setup