Onboard Serial Port 1; Onboard Serial Port 2; Onboard Parallel Port - Gigabyte GA-7VT600 User Manual

USB Mouse Support
Enabled Enabled USB Mouse Support.
Disabled Disabled USB Mouse Support. (Default value)
VIA LAN Boot ROM *
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disabled Disable this function. (Default Value)
Enabled Enable this function.

Onboard Serial Port 1

Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8,Using IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8,Using IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8,Using IRQ3.
Disabled Disable onboard Serial port 1.

Onboard Serial Port 2

Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8,Using IRQ4.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8,Using IRQ4.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8,Using IRQ3.
Disabled Disable onboard Serial port 2.

OnBoard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the
onboard I/O controller.
378/IRQ7 Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
278/IRQ5 Enable onboard LPT port and address is 278,Using IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC,Using IRQ7.
Disabled Disable onboard parallel port.
" * " For GA-7VT600-L only.
- 41 -
BIOS Setup