Setting Convection Bake - Frigidaire FGES3065K - Gallery 30 in. Slide-In Electric Range Important Safety Instructions Manual

Built-in range
Hide thumbs Also See for FGES3065K - Gallery 30 in. Slide-In Electric Range:
Table of Contents

Advertisement

SETTING OVEN CONTROLS

SETTING CONVECTION BAKE

This mode of cooking enables you to obtain the best culinary
results when baking with multiple pans and racks. Multiple
rack baking may slightly increase cook time for some foods
but the overall result is time saved. Some food may cook
faster and more evenly with Convection Bake. Convection
baking uses the three elements and a fan to circulate
the oven's heat evenly and continuously within the oven.
The oven can be programmed for Convection baking at
any temperature between 170°F to 550°F with a default
temperature of 350°F.
Convection Baking Tips:
• Always preheat your oven before using the Convection
Bake mode.
• During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
• If your recipe cooking temperature has already been
converted for convection baking there is no need to
reduce your oven temperature. If your recipe has not
had the temperature converted for convection baking
you can easily reduce using the Convection Convert
feature. Please see Convection Convert section on next
page for further instruction on temperature conversion.
• Use tested recipes with times adjusted for convection
baking when using this mode. Time reductions will
vary depending on the amount and type of food to be
cooked.
• When using Convection Bake with a single rack, place oven
rack in position 2 or 3. If cooking on multiple racks, place
the oven racks in positions 2 and 4; 1, 3 (offset rack) and
4 or 2, 3 and 4 if there is no offset rack supplied
• Most bakeries (except cakes) should be baked on pans
with no sides or very low sides to allow heated air to
circulate around the food.
• Food baked on pans with a dark fi nish will cook faster.
Air circulation during Convection Bake
24
Figure 1
Oven Rack Positions
To set the oven for Convection Bake and temperature
to 375°F
1. Arrange interior oven racks.
2. Press CONVECT. "CONVECT" and "BAKE" will fl ash
and "350" will appear in the display. If a Convection
Bake of 350°F is needed, press START.
3. Press 3 7 5. "CONVECT" and "BAKE" will keep fl ashing
and "375°" will appear in the display.
4. Press START. The actual oven temperature and the fan
icon will be displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
"375°", "CONVECT", "BAKE" and the fan icon.
5. Place food in the oven.
NOTE
Pressing CANCEL will stop the feature at any time.
Benefi ts of Convection Bake:
— Multiple rack baking.
— Some foods cook faster, saving time and energy.
— No special pans or bakeware needed.
NOTE
The convection fan will start AS SOON AS the oven is
set for Convection Bake. The display will show an icon
of rotating fan within a square. This rotating fan icon
indicates when the Convection Fan is operating. The Bake,
Broil and Convection elements will also cycle for a better
heat distribution.
4
3
2
1
Figure 2

Advertisement

Table of Contents
loading

Table of Contents