Chapter 1 - Setting Up The Printer; Unpacking The Printer; Choosing A Place For The Printer - Epson DFX-900 User Manual

Chapter 1
Setting Up the Printer

Unpacking the Printer

WARNING
w
The printer weighs 75 lb
(34 kg), so do not try to
lift it alone.
Make sure you have these items:
printer
printer software
Remove and save the protective packing materials as described on the
Notice Sheet.
2
34kg
ribbon cartridge
screwdriver power cord

Choosing a Place for the Printer

Place the printer on a flat, stable surface. The printer will not operate
properly if it is tilted.
If you use a printer stand, make sure it can support at least 75 lb (34 kg).
Never use a stand that tilts the printer.
Keep the printer away from direct sunlight, strong light, heat sources, or
excessive moisture or dust; or places subject to rapid changes in temperature
and humidity, or shocks and vibrations.
Keep your computer system away from potential sources of electromagnetic
interference, such as loudspeakers or the base units of cordless telephones.
Place the printer near a wall outlet where you can easily unplug the power
cord.
Placez l'imprimante près d'une prise de courant où la fiche peut être débranchée
facilement.
Position the power cord and interface cable so they do not interfere with
paper feeding.
Avoid electrical outlets controlled by wall switches or automatic timers, or
outlets on the same circuit as large motors or other appliances that can cause
voltage fluctuations. Power interruptions can erase your printer or
computer memory.
Use a grounded power outlet; do not use an adapter plug.
Do not block, cover, or insert objects into openings in the printer cabinet.
Setting Up the Printer 3