Brother Entrepreneur PR650e Operation Manual page 236

Embroidery machine
Hide thumbs Also See for Entrepreneur PR650e:
Table of Contents

Advertisement

APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
8
Neatly align the teeth of the clamping frame
with the base of the brim.
1 Teeth of outside clamping frame
2 Base of brim
Note
● Loosen the two screws for the outside
clamping frame, and then adjust the
position of the outside clamping frame so
that it conforms to the shape of the cap
and so that the teeth of the clamping frame
perfectly align with the base of the brim.
1 Teeth of outside clamping frame
2 Base of brim
3 Outside clamping frame
4 Screws for the outside clamping frame
234
9
Adjust the other side in the same way.
0
Close the lever of the snap lock.
1 Lever of the snap lock
Note
● If the cap fabric is thick and the clamping
frame cannot be closed, or if the fabric is
thin and the cap is too loose within the
frame, loosen the screw for the inside
clamping frame, and then adjust the inside
clamping frame.
1 Inside clamping frame
2 Screw for the inside clamping frame

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

884-t07

Table of Contents