Table of Contents
Advertisement
Red-eye
Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When []
(Red-Eye Reduction) is selected as the
flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people
in the image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Other
Useful
Flash
Features
• Changing the flash intensity (page 103)
1.
In the REC mode, press [A].
2. Use [A]
and [V] to select the bottom control panel option (Date/Time).
You can use [4] and [1_]to select date or time display.
_NOTE
• You can select either of two display styles (page 152) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
48
Snapshot Tutorial
Advertisement
Table of Contents
