Table of Contents
Advertisement
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always "iiBI Spot".
1.
In the REC mode, press [A].
2.
Use [A] and [V] to select the fourth
control panel option from the
bottom
(AF Area).
3.
Use [,]
and [,]
to select the setting you want and then press [SET].
This mode takes readings
of a small area i n the c enter of t he
................................................................................
image. This setting works well with focus lock (page 54).
You can move the focus frame by using [A], [V], [,],
and [l_]to
=
move the focus point and then pressing [SET]. To change the focus
point position, select "i-_1 Free" again and then use [A], [V], [4]
and [1_] to select the position you want.
'
[r#i (
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
"Fill Spot" or "i'I_1Tracking"
Focus frame
"I_1 Free"
[SET]
Focus point
Focus frame
• "i'I_1Tracking" cannot be used in combination
with the following features.
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-
motion Image, Lag Correction,
Expression CS, Baby CS, Child CS, Pet CS,
Sports CS)
• "i-_1 Free" cannot be selected for the AF area while Face Detection is enabled.
45
Snapshot Tutorial
Advertisement
Table of Contents
