Casio Physium Application User Manual page 17

4. Press w.
• The strip is inserted above the line or the strip where the cursor is currently located.
5. Enter up to 16 characters for the strip title.
6. Press w to assign the title to the strip.
• This will highlight the strip.
• You can execute the strip here by pressing w. For details about operations that are
required when you execute a strip, see "Calling a Physium Function from a Physium
Strip" below.
k k k k k Calling a Physium Function from a Physium Strip
This section explains operations for Physium strip that can be inserted into an eActivity file.
The following procedure assumes that the applicable Physium strip has already been
inserted into an eActivity file that is currently open.
1. On the eActivity workspace screen, use the f and c keys to move the highlighting to
the Physium strip.
5-2
Calling Physium Functions from an eActivity
20060601 20051201