Epson Stylus Color 900N User Manual page 31

Follow these steps to install Status Monitor 2:
1. Insert the printer software CD-ROM. You see the following screen:
If the screen does not appear, type
your CD-ROM) and click
2. Highlight
button
3. Close any open programs and click
to install Status Monitor 2.
4. Click
Next
.
Next
5. If you are using Windows 98 or Windows 95 and you have TCP/IP installed, you
see a screen asking you if you want to enable EPSON TCP/IP printing. Select
if you want to print with TCP/IP, and then click
Yes
TCP/IP Printing:
6. Select the type of printer(s) you want to monitor and click
Monitor: EPSON TCP/IP printers______ Windows shared printers _____
NetWare printers______ local printers_______
24
OK
Install Status Monitor 2 for Network
.
to accept the default directory or choose a different directory and click
Yes_______
(where
D :\EPSETUP
to start the EPSON Installation program.
and click the right arrow
. A screen appears asking where you want
Next
No_______
is the drive letter of
D :
.
Next
.
Next